Wooden Doors

Trying Maintenance Work For Your Wooden Doors?

ccoThe interior wooden doors are perhaps the most roughly used parts of a house. Doors are slammed shut, if they jammed, they are kicked till the time they opened, there are smudges all over, if there are children, perhaps they have used the nice looking wooden portion as their board to draw with their crayons, pets may have decided to scratch on them to the extent that they think they can actually dig a tunnel through them and go meet someone on the other end of a shut door. To avoid these issues many homes opt for Oak Cottage Doors.

Doors are an integral part of a house. A shabby door can make a house look ugly and tacky even if the interiors of your home are all done up and top notch. That does not mean that you must replace your door each year.

If you are in the process of building a home from scratch or renovating your home, and need assistance, you can get help here homebuildingmanual.com

There are different kinds of wooden doors but basically you have solid wooden doors such as oak, walnut, pine etc or hollow construction ones. The solid ones are either varnished or natural and unfinished. To find the right texture that fits your home will take some research on your part.

If your door is an unfinished interior door there are many finishes you can choose from be it the traditional look with matt or a silky sheen finish or something very unique. You also waxes polishes and varnishes to add to variety and bring about your preferred look.

In pre-finished doors, you can get information from the manufacturer’s documentation on what products you need for what kind of stain, which oil, wax etc.

A word about veneer doors – it’s a popular choice because of its low cost. A veneer door is not solid wood. It is MDF or medium density fibreboard. The core is made of MDF or a particle core over which a high quality wood veneer is fixed with strong glue and bonding chemicals. To assess the quality, its simply assessing the type and thickness of veneer and the type of core.

There is also a word of caution affixed with veneer doors. With consumers wanting to bring down construction costs, alternative options were explored. Veneer was found to be an inexpensive option, which meant manufacturers went on a bulk manufacturing spree to satisfy consumer demand. The costs of veneer doors went down but so did quality. The thickness was reduced significantly. Veneer doors under extreme weather conditions may peel off, but this is yet to be reported. The waxes, varnishes and paints do not penetrate deeper than 1 mm and therefore there really isn’t so much of a fear that it will go through the veneer, affect the glue and binding and then the core.

To be sure, always do a patch test. Find the least visible area on your door, say the bottom area, a bottom edge so that in case the product did not work well with the door, you can remove any stain or mark by rubbing sand paper and blending the test area with the rest of the door.

Be patient if you’re trying your hand at it. You don’t want to spoil your work! Read the instructions and manuals on products and follow them. It’s better to be safe than sorry, always. If you decide to get experts to help you, remember they’re just a call away and will fix things for you. So don’t fret. Have fun!